Home > Products > Power Tools > Impact Drills > 13mm Handheld Electric Impact Drills/Power Tools Machine

13mm Handheld Electric Impact Drills/Power Tools Machine

  • $5
    500-499
    Piece/Pieces
  • $14
    ≥500
    Piece/Pieces
Payment Type:
L/C,T/T,Western Union
Incoterm:
FOB
500
Min. Order:
500 Piece/Pieces
Transportation:
Ocean,Land,Air
Share:
Chat Now
  • Product Description
Overview
Product Attributes

Model No. KID1303

BrandKingdeal

Supply Ability & Additional Information

Packagingcolor box packing

Productivity100000pcs

TransportationOcean,Land,Air

Place of OriginChina

Supply Ability1000000

CertificateCE

Payment TypeL/C,T/T,Western Union

IncotermFOB

Packaging & Delivery
Selling Units:
Piece/Pieces
Package Type:
color box packing

Model : KID1303
Rated Voltage:220V~
Ratde Frequency:50Hz
Drill Capacity: 13mm
No-Load Speed: 0-2800r/min
Rated Input Power:710W


SAFETY:

1 BE SURE TO CARRY OUT STRICTLY THE RELEVANT RULES IN GB3387 THE TECHNICAL RULES ON MANGEMENT,USE,CHECKING AND SAFE MAINTENANCE OF THE HANDLE ELECTIC TOOLS.OTHERWISE YOU MUST OBEY OUR EXPLANATION FIRST.

2 REGULARIZING WORKPIECE THE WORKPIECE TO BE DRILLED MUST BE REGULARIZED AND PAY MORE ATTENTION TO IT WHEN IT IS DRILLED THROUGH.

3 NOT TO USE POWER WIRE WITHOUT LIMITED.BE SURE NOT TO LENGTHEN OR CHANGE THE POWER WIRE,NOT TO CARRY THE POWER WIRE YOUCH HEAT SOURCE AND OIL.PREVENT THEFROM BEING DAMAGED.

OPERATION:


1 USE ASSIGNED VOLTAGE The voltage in the cireuit must be not more than 10% at the date plate assignment before using it.

2 CHECK BEFORE BEING USED Let the tool have nonloading for one minute and see whether the function of transmission position is flexible and there is abnormal noise and the scraws become flexible and fall off and the inverting sparkle is normal or not.

3 PREVENT THE TOOL FROM OVERLOAD The head of the drill must be sharp.when you are drilling,you should not be too tough.If the rotation speed is reduced abnormally,you should reduce to exert yourself.If the drill stops suddenly or gets stuck,you turn off the power.

4 CHANGE THE BRUSH IN TIME If the brushes are too damaged to use,Change them both at the same time,otherwise the brushes and the inverter will be in loose contact even sparkle around or the inverter can be damaged.Sometimes the Armature would be burnt.

5 IT CAN NOT BE USED IN THE FOLLOWING CONDITION.If you find the insulate is danaged the power wire or electric cable case is briken, the plug and outlet is broken,and it works continually the sparkle appears seriously etc you should repair immediately.It can not be used before repaired.

6 USE THE TOOL CAREFULLY The tool used should be placed softly in order not to be shoched..

MAINTENANCE:


1 ADD OIL IN IT OF TEN The drill is apeed working tool.The lubrication grease is volalilized easily so the grease in reduction case and bearing must often be kept clean and add or change it anytime needed.

2 CHECK AND MAINTENANCE ON IT FREQUENTLY.The drill should be checked.repalred day and see whether the power,the plug and the switch work well or not. Pay attention to everything such as whether the insulation resistance works normally,the handle is flexible,the inverter and brushes are well contacted,the armature winding and the stator winding are in shourt circuit or broken circuit,and the bearing,the other noving parts are damaged etc.

3 EACH PART SHOULD BE WELL KET AND WHEN YOU WANT TO CHANGE THE PART.USING THE SAME ONES When the drill neds taking apart and checking.Do keep each part including insulation linerand casing pipe.If they are damaged you must change the new one and the same one. Be sure not to use use the substitution materials which is worse than one used and the part which does not agree with the standard.When fixing,you must put the parts in their proper position as usual and should not omit any of them.

4 BE CAREFUL OF THEINSULATION RESISTANC The drill not to be used for long or to have been used in damp condition must be tested in its vinding of the insulation resistance with a 500 million ohm metet.If the winding and iron center is less than 2million ohms,you moust drying treatment to the winding unit more than 2 million ohms.

5 STORED CAREFULLY The drill should be kept in a sry clean place and without any corrosive gares.


KID1303 impact drill









Product Categories : Power Tools > Impact Drills

Home > Products > Power Tools > Impact Drills > 13mm Handheld Electric Impact Drills/Power Tools Machine
Email to this supplier
  • *Subject:
  • *To:
    Mr. Cai
  • *Email:
  • *Message:
    Your message must be between 20-8000 characters
Send Inquiry
*
*

Related Products List

Home

Product

Whatsapp

About Us

Inquiry

We will contact you immediately

Fill in more information so that we can get in touch with you faster

Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.

Send